Home  |  Introduction  |  Contact Us   
  
Solutions to Global Competition
AMERI-SOURCE SPECIALTY PRODUCTS
5372 Enterprise Blvd., Bethel Park, PA 15102
Ph: 412.831.9400 | Fx: 412.831.9401
contact@ameri-source.com
 

Graphite Division

    • Graphite Electrodes
    • Graphite Block & Rod
    • Extruded Graphite
    • Molded Graphite Block
    • ISO Static Graphite
    • Machined Graphite

Specialty Metals Division

    • High Carbon Hardened
      & Tempered Steel Strips
    • High Carbon Annealed
      Steel Strips
    • Stainless Steel 301 Strips
    • Stainless Steel 304 Strips
    • Stainless Steel 410 Strips
    • Stainless Steel 430 Strips
    • Constant Force Springs
    • Bundy Tubes

Contact Us

Sitemap

Home
Ameri-Source
Specialty Products
5372 Enterprise Blvd.,
Bethel Park, PA 15102
Ph: 412.831.9400
Fx: 412.831.9401
contact@ameri-source.com

High Carbon Hardened and Tempered Steel Strips

Grades: SAE1095, SAE1075, SAE1065 & SAE1050

Application Industry:

  • Band saw blades for wood working
  • Hand Saw, Cross cut saw for wood cutting
  • Flat springs for automobile clutch plates
  • Doctor blades for paper industry
  • Shims and washers for automotive industries
  • Circular saw blanks
  • Engineering industry
  • Masonry and agricultural tools
  • Industrial knives
  • Stone cutting
  • Springs
  • Etc.

Manufacturing Capabilities:

Width 6mm to 500mm
Thickness 0.10mm to 3.5mm
Finish Bright / Blue / Bronze and Grey
Edges Sheared, Round and Square edge
Flatness Maximum 0.025mm in 25.4mm width
Grades High / Medium Carbon and Alloy Steel
Camber Maximum Deviation +/- 0.05mm per 1000mm length
Cut Length Max length 3000mm + 2mm - Nil, Minimum length 500mm + 2mm - Nil
Coil Weight Maximum 4.00kg/mm strip width
Packing The strips are normally packaged with light coat of V.C.I. oil followed wrapping with thick polythene film and finally with polythene lined Hessian strips. These are further covered with sea worthy G.I. sheets and strapped on metallic pallets in case of exports.

Tolerances: As per ASTM, DIN, BS & JIS
Home | Introduction | Sitemap | Contact Us
Graphite Electrodes | Graphite Block | ISO Static Graphite | Machined Graphite
Carbon Steel Strips | Stainless Steel Strips | Constant Force Springs | Bundy Tubes
AMERI-SOURCE SPECIALTY PRODUCTS
5372 Enterprise Blvd., Bethel Park, PA 15102
Ph: 412.831.9400 | Fx: 412.831.9401
contact@ameri-source.com